Parts & Accessories

- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

Super-compact and lightweight magnet-less cycling sensors. The pair includes the Pro Speed Sensor (hub mounted) and the Pro Cadence Sensor (crank arm mounted). Both feature a translucent Composite Matrix construction with a LED indicator. And each has a high-tech dual Bluetooth system that can simultaneously pair with cycling computers and smart trainers. Replaceable CR2032 battery included. - Weight: 11g - Dimensions: 37 x 33 x 13mm

GNT ANT+/BLE 2-in-1 Speed & Cadence Sensor Black Product description - ANT+ and Bluetooth low energy compatible speed and cadence sensor - Attaches with included zip-ties to the frame - Includes mounts, sensor, and magnets

A lightweight and highly adjustable mount for positioning any Garmin computer on aero bars. The pivoting two piece design offers multiple mounting positions based on aero bars, hydration systems and rider preference. - For 22.2mm diameter aero bar extensions - Compatible with all Garmin EDGE computers - Highly adjustable for multitude of mounting positions - Replaceable Garmin Insert with K-EDGE “Definitive Click” locking system - GoPro Interface Compatible - Weight: 29g - Anodized Colors: Black, Red, Blue - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

The Shimano EW-EC300 Charging Cable is compatible with new Shimano 12-speed road Di2 systems. This cable will also recharge the Dura-Ace R9200 and Ultegra R8100 power meter cranksets. 1700mm cable length

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

K-Edge's Go Big Pro Saddle Rail Mount is designed to lock your GoPro camera securely under your bicycle saddle with rock-solid reliability. Quick and easy attachment to standard bicycle saddle rails with camera angle adjustability to dial in your video and photos. Make your buddies jealous while making them look like heroes (albeit while riding your wheel) with this no-shake, no-break, and no-worries camera mount. Specifications: - Made in the USA - CNC Machined 6061 T6 Aluminum - Weight – 45 grams, super light, super strong - Compatibility – clamp design fits all standard 2-rail saddles including oversized carbon rails; all mounting hardware included; compatible with all GoPro HERO Original, HERO2, and the new HERO3 Cameras. Shimano CM-1000 and Garmin VIRB compatible when using the adapter supplied with the VIRB.

The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes

Whether you are riding the trails or hitting the slopes, the Pinclip Action Cam Mount is the best way to capture the thrill with a vibration-free view. This set comes with 1 female connector and 2 male connectors so it can be easily switched from body, helmet, or bike. - Compatible with all popular action cameras - Simple, intuitive operation - Safe and reliable retention force - Robust and maintenance free design Dimensions: Height: 28 Length: 51 Width: 27 Weight: 0.036

Flexible & Versatile The VACUUM handlebar base flex offers a brilliantly simple solution for anyone who wants to keep their smartphone securely in view while cycling. Thanks to the combination of magnetic force and suction, the device stays firmly attached to the handlebars, yet can be easily operated, released, and re-secured with just one hand. The smartphone mount can be installed with just a few simple steps and without the need for tools. This allows the smartphone to be attached to different handlebars in a flexible manner. Therefore, the FIDLOCK VACUUM handlebar base flex is also suitable for attachment to scooters and strollers, in addition to bicycles Simple & Strong The phone can be easily connected to the holder via magnetic guidance and reliably holds the smartphone on the base. When under high pressure, the hold is additionally secured by the force of the suction cup through a vacuum. The centering of the smartphone is ensured by the magnetic force - so the suction force always grips. The smartphone is released by simply operating a lever on the side of the handlebar holder. Safe & Practical Thanks to the ingeniously simple combination of magnetic force and vacuum, the smartphone can be operated with one hand and is rotatable by 360°, while a ratchet prevents it from rotating. In addition to the handlebar base, the magnetic mounting system requires a counterpart that incorporates the appropriate magnet. This can be achieved, for example, through a special ultra-thin smartphone case, a universal patch with an embedded geometry, or an universal waterproof case for the smartphone. The advantages in a nutshell - for installation on the handlebar - fits all bar tubes Ø 40 mm - no interference with electronics - fits all VACUUM cases

Shimano Di2 Frame Junction Box Frame Junction Box connects via SD50 E-tube wires to four different points: front derailleur, rear derailleur, cockpit junction box and battery mount All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions Use Di2 system checker to update component firmware from http://e-tubeproject.shimano.com/

An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8? Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded

- The first and only out front mount for Cateye cycling computers - Intended for everyone: Recreationalists, Enthusiasts and professionals - Compatible with all wireless Cateye cycling computers -- 31.8mm diameter handlebar clamp

Our patent-pending integrated mount for the ELEMNT ROAM GPS bike computer is made of durable, lightweight plastic. It also comes with an optional locking screw that is UCI-compliant for connecting your ELEMENT ROAM to your bike for weigh-ins. - Fits 31.8mm round bars - Weight: 1.55 oz (44g) - Works exclusively with ELEMNT ROAM

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails

The Forward Mount is a hinged handlebar mount featuring a stiff and durable composite matrix construction with secure X-Lock and an integrated rubber shim. With a pressed-in stainless steel nut and 3mm hex stainless steel bolt, this mount's sleek, lightweight design positions the GPS computer in front of the stem for better visibility and improved aerodynamics. The X-Lock is a secure and reliable mounting feature integrated into the Standard GPS Mount and the Forward GPS Mount. It safely locks in the computer for worry-free riding over any type of terrain.

With this adaptor piece, you are able to easily convert any Garmin quarter turn bike computer mount to a Wahoo bike computer mount.

Our stem mount for Wahoo ELEMNT GPS bike computers is made of lightweight, durable plastic and is a great solution for cyclists who prefer to keep their computer on top of the stem. - Fits any stem - Weight: 0.2oz - Works with ELEMNT, ELEMNT ROAM, ELEMNT BOLT, and ELEMNT Mini Note: BOLT loses aerodynamic advantage with this mount)

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

Worried about losing the fastest bike computer on the market? Our ELEMNT BOLT and ROAM specific tether screws into the back of your ELEMNT BOLT or ROAM and allows you bike computer to still fit on its patent-pending integrated out front mount for optimum aerodynamic performance. - Includes tether and attachment screw

Each GPS unit comes with a Standard GPS Mount. Included are two sets of o-rings (two diameters), plus a backup o-ring in each size, a rubber shim and an X-Lock composite mounting bracket. The rubber shim supports the X-Lock mount which is engineered to attach at any 9° angle and still allow the computer to be mounted forward. The two super durable o-rings secure it to the bar, and the patent-pending X-Lock design will prevent the computer from being knocked out. The X-Lock securely fastens the GPS computer to the mount by pressing down at a 45° angle and rotating it forward until it "locks" into place.